Global Natural Gas Valves PN16-PN40:
PN40 - FLANGED
PN40 DN15 -- DN150
MANUFACTURING STANDARDS
Design: TS 9809 / TS EN 331
Connection: FLANGED TS EN 1092-2 / ISO 7005-2
Face to Face Dimensions: TS 9809 Sheet 5 / TS EN 331 DN15….DN125 = TS EN 558 Series 1 / DIN3202 F1 DN150 = TS EN 558 Series 28 / DIN3202 F7
Tests: TS EN 12266-1 / TS 9809 / TS EN 331 / TS EN 19 / TS EN 331 / TS 9809

FEATURES

PN 40 Natural Gas Globe Valve operates by quarter turn (90 degrees) rotation of a perforated sphere through the control shaft between Teflon bearings, parallel or perpendicular to the flow axis.

Can be used in both directions.

Provides 100% tightness at the lowest and highest pressures through stainless steel plate spring-reinforced Teflon (PTFE) bearings.

The compatibility of Teflon material with a variety of fluids and its resistance to high temperatures allow for a wide range of applications.

The globe is made of stainless steel, and the body is made of spheroidal cast material.

Suitable for use in fully open or fully closed position.

There is almost no pressure loss since there is no narrowing in the flow section in the open position.

Can be controlled with low torque.

Suitable for gear housing and actuator assembly.

Can be produced with a narrowing passage.

APPLICATION AREAS
Natural Gas, Hot Water, Steam, Non-corrosive fluids, LPG
TEMPERATURE
+200 °C